*
*
Network Address System
Network Public Address System
Network Public Address System
35
4.3.8 Timing Program Setup
Set timing point:
Time point programming is the key to unattended operation of the system.
The user can touch "Timing task" on main interface to enter the "Time Program Setup" interface as shown in fig
(13)
Edit timing point:
The steps to edit the timing point are as follows:
Touch the "Adding" button in "Timing program setup" column in the lower area of the interface, and an interface
will pop up, as shown in fig (14). The user may set up a timing point on this interface. A timing point may be set
“by cycles”, “by time” and “Special timing point”.
①
By cycle means the timing will be executed in cycles in
accordance with the days selected, and it need to set the start time of the timing point, the user should select
desired days from a week in the column of “weekly cycle”.
②
“By time” means that it needs to set the range for
starting and ending of the time, and it also need the specific start time point.
③
“Special timing point” has 3
timing schedules: 1. On the range of date, the added timing point “by week” and “by time” do not perform a
special time point . 2. On the range of date, the added timing point “by week” do not perform a special time point .
3. On the range of date, the added timing point “by day” do not perform a special time point .
figure (12)
slide pusher to adjust
the zone volume
