*
*
Network Address System
Network Public Address System
Network Public Address System
8
Customize IP interface.
2.1.1 Installation of phone paging module
The phone paging module can be installed on the extension card slot of the network PA Host with 2 screws.
2.1.2 Settings of phone paging module on the host
To set the phone paging module in network PA host, first install and connect the module, and then modify the IP
address of the module to be in the same network segment as the host (see 5.8.2 Equipment Maintenance). To set
the parameters, enter the "device settings" interface, double-click the phone paging card or click the "edit" button,
and check the "terminal number", "version number", "terminal type" and "IP address" of the device as shown in
the below figure. "Terminal name", "transit server", "channel control" and other parameters can be set. Then click
the "save" button in the lower right corner to take effect.
Mainly for setting incoming
calls. After setting the
password, when there is a phone
call, it is needed to enter the
password to answer the phone.
(password is less than 7 digits)
Set up a specific device. After
setting, user do not need to
enter the device number when
making a call to a specific
device (it is still needed to
enter the device number when
selecting a zone device).
