*
*
Network Address System
Network Public Address System
Network Public Address System
16
DIP switch, the indicator will stop flashing and the modified IP parameters will be effective.
5. Network indicator
When this system is offline, the LED is in green color, and it turns red when network connection to the controller
is re-established.
6. Power sequence output socket
The host is equipped with 4 channels power sequence output socket for supplying power to other devices. The
power ON and OFF of this interface can be controlled by the timing point. It will automatically turn on/off with
the arrival of the timing point when it is in the "programmed" state
Features:
Smart power management function
Host switch and power management function
Indicating function of alarming, fault and the other emergencies output
Supporting 12V/100mA and shortcut output connecting with the output indicator
Integrated control function of 4 way power output
2.6.1 Settings of stand-by module for power extension on the host
To set the stand-by module for power extension in network PA host, first install and connect the module, and then
modify the IP address of the module to be in the same network segment as the host (see 5.8.2 Equipment
Maintenance). And then set the parameters as shown in the below figure.
The stand-by module for power extension can be installed on the extension card slot of the network PA Host
with 2 screws.
