Description Of Controls
057-230 ISSUE: 1
Page 62 of 100
4.5.10.1 VIEWING THE EVENT LOG
To view the event log, press both
(up) and
(down) buttons simultaneously, the navigation menu
is then displayed. Once entered, cycle to the event log (
) section and enter.
To view the event log, repeatedly press the
(up) or
(down) buttons until the LCD screen
displays the desired event.
Continuing to press down the
(up) or
(down) buttons cycles through the past alarms after
which the display shows the most recent alarm and the cycle begins again.
To exit the event log, press the
(up) and
(down) buttons simultaneously to enter the navigation
menu. Once entered, cycle to the desired intrunmentation section.
23 h
11
50
56 m
Icon to indicate that
the event log is
currently display
Number of
event displayed
out of 50
Current operating
state of the module
Icon to indicate
the electrical trip
or shutdown
alarm that has
been recorded
The engine hours at
which the event occurred
