Specification
057-230 ISSUE: 1
Page 20 of 100
2.11 ADDING AN EXTERNAL SOUNDER
Should an external alarm or indicator be required, this can be achieved by using the DSE
Configuration Suite PC software to configure an auxiliary output for
Audible Alarm,
and by configuring
an auxiliary input for
Alarm Mute
(if required).
The audible alarm output activates and de-activates at the same time as t
he module’s internal
sounder. The Alarm mute input and internal
Lamp Test / Alarm Mute
button activate ‘in parallel’
with each other. Either signal mutes both the internal sounder and audible alarm output.
Example of configuration to achieve external sounder with external alarm mute button:
2.12 ACCUMULATED INSTRUMENTATION
NOTE: When an accumulated instrumentation value exceeds the maximum number as
listed below, the value is reset and begins counting from zero again.
Engine Hours Run
Maximum 99999 hrs 59 minutes
(Approximately 11yrs 4 months)
Accumulated Power
999999 kWh / kVArh / kVAh
The number of logged
Engine Hours
and
Number of Starts
can be set/reset using the DSE
Configuration Suite PC software. Depending upon module configuration, this may have been PIN
number locked by your generator supplier
