Description Of Controls
057-230 ISSUE: 1
Page 48 of 100
4.4.3
ACTIVE CONFIGURATION
An icon is displayed in the
Active Config
section to indicate the active configuration within the currently
selected within the controller.
Icon
Details
Appears when the main configuration is selected.
Appears when the alternative configuration is selected.
4.4.4
FRONT PANEL EDITOR (FPE) / AUTO RUN ICON
NOTE: For further details
about the Front Panel Editor, see the section entitled ‘Front
Panel Editor’ elsewhere in this manual.
When running in
Auto Mode
and on the Home (
/
) page, an icon is displayed in the
FPE /
Auto Run
section to indicate the source of the auto start signal.
Icon
Auto Run Reason
Appears when a remote start input is active
Appears when a low battery run is active
Mains failure
Appears when a scheduled run is active
4.4.5
MODE ICON
An icon is displayed in the
Mode Icon
section to indicate the mode the controller is currently in.
Icon
Details
Appears when the engine is at rest and the unit is in
Stop/Reset Mode
.
Appears when the engine is at rest and the unit in
Manual Mode
.
Appears when the engine is at rest and the unit is
Test Mode
.
Appears when the engine is at rest and the unit is in
Auto Mode
.
Appears when a timer is active, for example
cranking time
,
crank rest
etc.
Appears when the engine is running, and all timers have expired, either on or off load.
The animation speed is reduced when running in idle mode.
Appears when the unit is in the front panel editor.
Appears when a USB connection is made to the controller.
Appears if either the configuration file or engine file becomes corrupted.
