DSE Model 7560 ATS and Mains Controller Operators Manual
057-017 7560 OPERATING MANUAL ISSUE 10.2 10/02/09 AM 7
2 INTRODUCTION
This document details the installation and operation requirements of the DSE7500 Series modules,
part of the DSEPower® range of products.
The manual forms part of the product and should be kept for the entire life of the product. If the
product is passed or supplied to another party, ensure that this document is passed to them for
reference purposes.
This is not a controlled document. You will not be automatically informed of updates. Any future
updates of this document will be included on the DSE website at www.deepseaplc.com
The DSE7560 Mk1 controller is an update to the popular DSE7560. It maintains all the
functions and flexibility of the DSE5560 while being packaged in DSE7000 series styling
bringing with it the advantages of the DSE7000 series terminal compatibility easing system
upgrades. The DSE7560 Mk1 controller is compatible with DSE5560 and DSE556 controllers
when used in a multiple controller system, connected by the MSC (Multi-Set
Communications) Link.
The DSE 7560MK1 Module allows the OEM to meet demand for increased capability within the
industry. It allows the user to start and stop the generator and if required, transfer the load to the
generator either manually or automatically. The user also has the facility to view the system
operating parameters via the LCD display.
Utilising the inbuilt synchronising, volts matching and paralleling functions, the controller is able to
parallel with the mains supply for simple peak lopping (fixed generator output). Alternatively, the
7560MK1 can be used to parallel with other DSE 7560MK1 load sharing controllers. Up to 16 sets
can be connected in paralleling and load share as a standalone (prime power) system. Additionally
they can parallel with the mains supply (when used in conjunction with DSE 7560MK1).
The DSE 7560MK1 module also monitors the engine, indicating the operational status and fault
conditions, automatically shutting down the engine. Exact failure mode information is indicated by the
LCD display on the front panel.
The powerful Microprocessor contained within the module allows for many features to be
incorporated as standard;
•
Full Multilingual LCD display (including non-western character fonts).
•
True R.M.Ss. voltage monitoring.
•
Power measurement.
•
Communications capability (RS485)
•
Check Sync capability
•
Automatic Sync capability
•
Load share / control capability
•
Fully configurable inputs for use as alarms or a range of different functions also available on
P130 expansion inputs (optional)
•
Extensive range of output functions using built in relay outputs or relay expansion available.
•
Instrumentation and diagnostics from electronic engines when connected to an engine ECU.
Selective operational sequences, timers and alarm trips can be altered by the customer via a PC
using the 75xx For Windows ™ software and 810 interface or via the integral front panel
configuration editor.
Access to critical operational sequences and timers for use by qualified engineers, can be protected
by a security code. Module access can also be protected by PIN code. Selected parameters can be
changed from the module’s front panel.
The module is housed in a robust plastic case suitable for panel mounting. Connections to the
module are via locking plug and sockets.
