DSC T-LINK TL250, Installation Manual

Page: 13 / 44

9
Section 6: DVACS Installation (Mode 5, TL250 only)
6.1 DVACS Panel Installation.
Remove power from the control panel before wiring connections to the T-Link TL250 module.
Connect the + and - terminals to the panel auxiliary power output. Connect the DVACS cable
from the T-Link TL250 Adaptor on the PC-Link header to the DVACS connector on the control
panel. Connect the e-ground to a proper earth-ground connection.
In a typical DVACS Installation, a DVACS panel is connected to an F1/F2 subset that communi-
cates the alarm information to the central station comprising an SG MRL2 receiver with an SG
DVL2A module installed.
To send DVACS Alarm information over the internet, the T-Link TL250 performs the equivalent
functions of the F1/F2 subset and the polling function of the SG DVL2A. DVACS alarm infor-
mation is sent to the T-Link TL250 by connecting the existing RJ-45 terminated cable to the PC-
Link Header on the TL250 module with an RJ-45 to PC-Link adaptor. The TL250 transmits
DVACS alarm information in the DVACS protocol and T-Link Alarm information in the SIA
protocol over the internet to a System III Receiver with SG-DRL3-IP line card installed.
6.2 DVACS Events
DVACS events generated on DVACS panels connected through the T-Link TL250 follow the
same protocols used on the SG-DVL2A module.
DVACS Alarms Examples
Example 1 (DVACS with receiver set as 1 digit line number)
Printer:
Computer:
Example 2 (DVACS with receiver set as 3 digits line number)
Printer:
Computer:
01 Nov 2004-11:38:22-01/02-SG -01-1-001--Burgl Alm Zn#02
1011 001 A 02
01/02-SG -01-001-014--Burgl Alm Zn#13
101001 014 A 13
DVACS Panel
Installed in Cabinet
ULC Listed Installation
DVACS RS-232
TX, RX, GND
12/24V
DC
Red, Blk
F1/F2
DVACS
Subset
MLR2
with DVL2A
DV1660
DVACS
Network
DVACS
Network
S G - D V L 2 A
T x
R x
A L A R M
A C K . /
T R O U B L E
S E L E C T
W AT C H D O G W AT C H D O G
S E L E C T
T R O U B L E
A C K . /
A L A R M
R x
T x
C A R R I E R C A R R I E R
F U N C T. F U N C T.
BAC K S PAC E
R x
E S C A P E
T R O U B L E
O P T I O N
AC K .
E N T E R
T x
S G - C P M 2
AC
F E D
7 8 9 C
6 5
0
B
1 2 3 A
4
LAN/WAN/
Internet
LAN/WAN/
Internet
DVACS Panel
Alternate
Power Supply
Installed in Cabinet
ULC Listed Installation
DVACS cable must be run
in metal conduit & terminated
with an RJ-45 connector
RJ-45 to PC-Link Adaptor
12V Red, Blk
DC
T-Link TL250
PC 5003C Cabinet
CON5
CON2
CON1CON1
CON3CON3
PCLINK PCLINK
SPD ACT LNK SPD ACT LNK
STAT STAT
+12V GND TX RX GND RED BLK YEL GRN PGM1 PGM2 IN1 GND IN2 IN3 GND IN4 EARTH +12V GND TX RX GND RED BLK YEL GRN PGM1 PGM2 IN1 GND IN2 IN3 GND IN4 EARTH
220
System III Receiver
with DRL3-IP Line Card
RRLLL = 02345
IP Account = 010A000034
DVACS Automation Protocol
1 Digit 101A 034...
2 Digits 1010A 034...
3 Digits 10100A 034...
SIA Automation Protocol
1 Digit S025[#000034|...
2 Digits S0245[#000034|...
3 Digits S02345[#000034|...
ID = 34
Account = 010A000034
RRLL = 010A
For Decimal Account#
Account = 010A000056
Typical T-Link TL250/DVACS Installation
ULC Listed Power Supply
with Battery Backup
DV1660