Druck PACE1000, Instruction Manual

Page: 57 / 76

Copyright 2010 Baker Hughes Company.
English–PACE Indicators Instruction Manual | 47
Supervisor Setup
c. Use the UP and DOWN arrows to highlight the required parameter. The choices are
OPEN or RESTRICTED.
d. Press the ACESS MODE OPEN or ACCESS MODE RESTRICTED touch pad at the
top of the screen to set the required access mode.
10. To change CONTROLLER IP ADDRESS complete the following:
a. On the ETHERNET PARAMETER screen, use the UP and DOWN arrows on the right
of the screen to highlight the ACCESS CONTROL field.
b. Press the ACCESS CONTROL touch pad on the top of the screen.
c.
Use the UP and DOWN arrows to highlight the CONTROLLER IP ADDRESS field.