WatchMaster
®
IP Elite User Manual
41
Figure 403: Motion Detection Capture Menu
6.4
MAINTENANCE
The IP Camera is shipped with default software from the factory. DRS may make available
software updates and enhancements to the IP camera from time to time. Table 14 and Figure 41
through Figure 45 provide details on the maintenance menu.
Table 14: Maintenance
Maintenance
Description
Status
Provides information about the system and key system
components (Sensor and Internal Memory). System
temperature, system software version and build time, system
start time, system serial number and system state can be
seen on the screen. Status also includes storage capacity and
available memory. Additionally details about the sensor used
in the system are also provided. This includes sensor name,
sensor software, sensor firmware sensor serial number, and
camera FOV.
Restart Camera
Press this to restart the camera. Again, press the Reboot
Camera button in the next screen. Confirm the action to restart
in the popup window. The Camera will restart and may take up
to 90 seconds. Make sure to refresh the screen or press the
F5 key for the login prompt.
Restore Factory
Defaults
Select this option to restore the camera to factory default
settings. Press again on Restore Factory Defaults and confirm
the action when prompted.
