WatchMaster
®
IP Elite User Manual
16
Figure 17: Solar Shroud with Stem
Bumpers
Figure 18: Fully Assembled Camera
4.6
MOUNTING THE CAMERA
1.
The WatchMaster
®
IP Elite 3000 camera can be mounted on a Pelco or Axis Bracket. For
Tripod mount, use the WatchMaster
®
IP Tripod Adapter offered as an accessory.
2.
For Pelco Mount, secure the Camera Base Mount to the Standard Pelco Bracket (not provided)
using #1/4-20 screws (not provided).
3.
For Axis Mount, first secure the optional Axis mount adapter to the base mount.
4.
Position the assembled Camera’s 4 hole Axis mount adapter onto the Axis wall bracket and
tighten the Metric M5 Screws (not provided). Using a hex wrench, loosen the bracket
adjustment screw to aim the camera to the point of interest.
Video of the setup and assembly procedure of the WatchMaster
®
IP Elite camera can be found at
http://youtu.be/tFmwIowRWG8
4.7
MANUAL FOCUS AND FOCUS TOOL
The WatchMaster IP Elite 3000 is set to infinity focus at the factory using a simple collimated
target suitable for each FOV. Rewing the focus during installation of the camera is recommended
for optimal image quality so necessary adjustments suitable for the environment and the target
object can be made.
The independent 40°, 16°, 9° field of view camera lenses can each be focused
manually by hand. Make sure not to touch the lens when adjusting the focus. However, the 40°
lens may require the use of a focus tool. The focus tool is available from DRS as an optional
accessory item. For ordering details, please refer to the DRS WatchMaster IP Elite 3000 price
sheet.
Table 4: IP Elite Focus Information
FOV
Effective Focal Length
f/#
40º
7.5mm
f/1.2
16º
19mm
f/1.1
9º
35mm
f/1.2
The camera is now ready for use!
