Service Manual
rev 5.0 with software Ind1V022
displayed page remains on the keypad display.
Default page/OM
P6.4.2.
Timeout time
P6.4.3.
The time after which the keypad display returns to default page.
Contrast P6.4.4.
Display
contrast.
Backlight time
P6.4.5.
Determines how long the backlight stays before going out. Value “0”
means Forever.
0 - 65535
S6.5. Param Transfer
Up to keypad
S6.5.1.
Save parameter settings up to keypad
Down from keypad
S6.5.2.
Download parameter settings down from keypad
Parameter Sets
S6.5.3.
Not used in travelling inverter
Param. BackUp
P6.5.4.
Changes in parameters are automatically saved to Keypad settings
Yes / No
S6.6. Param Comparison
Set 1
S6.6.1.
Actual parameter values are compared to Default parameters. Value of
parameters can also be changed in this display.
Par. No. = Default val.
Actual value
Set 2
S6.6.2.
Actual parameter values are compared to file User parameters. Value
of parameters can also be changed in this display.
Par. No. = User val.
Actual value
Factory settings
S6.6.3.
Parameter file Factory settings is not used in travelling inverter
Keypad set
S6.6.4.
Actual parameter values are compared to parameter file saved in
Keypad.
S6.7. Info
Power unit
I6.7.1.
Manufacturer data
Unit voltage
I6.7.2.
Nominal voltage of the power unit
Software version
I6.7.3.
Control unit software version.
Firmware interf.
I6.7.4.
Application interface version of the software.
4.16
S6.7.5. Expanders
A:
E6.7.5.1.
Type of expander board at slot A
NXOPTA6
State
E6.7.5.1.1.
State of expander board at slot A
Run
Program version
E6.7.5.1.2
Software version of expander board at slot A
B:
E6.7.5.2.
Type of expander board at slot B
NXOPTA3
State
E6.7.5.2.1.
State of expander board at slot B
Run
Program version
E6.7.5.2.2
Software version of expander board at slot B
C:
E6.7.5.3.
Type of expander board at slot C
No board
State
E6.7.5.3.1.
State of expander board at slot C
Program version
E6.7.5.3.2
Software version of expander board at slot C
D:
E6.7.5.4.
Type of expander board at slot D
NXOPTB9
State
E6.7.5.4.1.
State of expander board at slot D
Run
Program version
E6.7.5.4.2
Software version of expander board at slot D
E:
E6.7.5.5.
Type of expander board at slot E
No board
State
E6.7.5.5.1.
State of expander board at slot E
Program version
E6.7.5.5.2
Software version of expander board at slot E
Brake chopper
E6.7.5.6.
Brake resistor
E6.7.5.7.
S6.7.6. Applications
A6.7.6.1. Crane
Application id
D6.7.6.1.1
Application identification number
Industr1
Version
D6.7.6.1.2
Application version number
2.20
Firmware interf.
D6.7.6.1.3
Firmware interface number
4.16
33/58
Drivecon Inc. reserves the right to alter or amend the above information without notice.
Summary of Contents for D2L
Page 59: ......
