41 of 95
Reference Manual ATOM one SSM500
10 Video Commands
10.1 video_mode <mode>
Set the output video mode of both chains.
Caution:
In Trigger Mode changing the video mode invalidates all recording buffers, the
data will be lost!
Note:
Since the video mode is essential to play back recorded buffers, it will get saved
automatically in Trigger Mode, even if
save_settings
is not called by the user.
Mode ID
Resolution
Frame Rate
4
1920x1080
30
5
1920x1080
25
6
1920x1080
24
7
1920x1080
23.98
8
1920x1080
29.97
9
1920x1080
50
10
1920x1080
60
11
1920x1080
60i
12
1920x1080
50i
13
1920x1080
59.94i
14
1920x1080
59.94p
10.2 fps_mode <mode>
Note:
This command is only available in the ATOM one SSM500 in Trigger Mode. For the
SSM Mode see the
phases
command instead.
Set the video mode of the image sensor (capture frame-rate). The camera will
automatically use the fractional equivalent of the selected frame-rate if a fraction video
mode is selected (see
video_mode
command above).
Caution:
Changing the frame rate of the sensor invalidates all recording buffers, the data
will be lost!
Note:
Since the fps mode is essential to play back recorded buffers, it will get saved
automatically, even if
save_settings
is not called by the user.
