Draytek Vigor300B, User Manual

Page: 38 / 224

Vigor300B Series User’s Guide 30
– Click the icon to remove the selected entry.
IP Alias Type other IP addresses to be bound to this interface. This
setting is optional. If you have typed addresses here, you can
see and choose it in later web page settings (e.g.,
NAT>>Port Redirection/DMZ Host) .
Add – Click this button to display the IP address field for
adding a new IP address. Type the IP address on the tiny
boxes one by one.
Save – After finished the IP address configuration, click
Save to save the setting onto the router.
– Click the icon to remove the selected entry.
MTU/MRU Type the value of MTU/MRU. The default value is 1500.
Connection
Detection Mode Select a detecting mode for this WAN interface. There are
three ways
ARP , PING and HTTP supported in Vigor
router for you to choose to send the request out.
Connection
Detection Host Add – Click this button to have a field for adding a new IP
address. Assign an IP address or Domain name as a
destination to be detected whether the host is active (sending
reply to the router) or not. If not, the connection of WAN
interface will be regarded as breaking down. This function
is available when
Connection Detection Mode is set with
PING or HTTP .