www.drawell.com.cn
3.1.1.3 in the “cycle parameter” window, press F1 to turn to the previous page, press
F4 to turn to the next page. Press the SHIFT button to select the temperature point, the
time range option, enter the value using the number buttons. Press F4 after completing
the setting, the system get into the windows of “file name setting”.
Note
:In the "cycle parameter"window,Press "Tab" to turn to"Temperature Gradient
Distribution"window while the cursor stay at the stage which has been set grads.Press
"ESC"to exit.
3.1.1.4 the file name could only be composed of by numbers and characters. It can
be entirely numbers, entirely characters and combinations of numbers and characters.
You can set the file name by input the numbers or characters in the file name display
section. Press “Tab” to change between the capitalization and the lowercase, press SHIFT
button to select the required character, and press ENTERr to input. Press the number
buttons can directly input the numbers into the display section. You can press ESC to
cancel you wrong input, and then re-input. Press F4 to save after setting.
