Drawell DU-8800DS Series, User Manual

Page: 35 / 56

31
Test
1. Press
【
F1
】
to setup a group of wavelengths for testing by pressing the
numeric keypad followed by
【
ENTER
】
.
( )
or
( )
to modify the
inputted data Fig. 69. Press
【
ESC/STOP
】
to finish setup and exit.
Note: It is recommended to enter the highest wavelength first.
Fig 69
2. Press
【
F2
】
to select mode (Fig 70).
Fig70
3. Push the blank cuvette into the Reference Light Path and Main Light
Path, then press
【
ZERO
】
for Blanking .
4. Pull the sample cuvette into Main Light Path, press
【
START
】
to test.
The test results will be displayed on the screen (Fig 71).