Rapid Link Shutdown
83
Horizon Compact Plus Release 1.0.1
Wireless Ethernet Product User Manual
– Volume 2
Required Action
Steps
Configure rls [on/off]
[basic/advanced]
Turns the Rapid Link Shutdown (RLS) feature on or off. Turning RLS
on, with the optional "advanced" feature, enables use of the signal fault
monitor as well as the signal degrade monitor. Setting RLS on without
issuing the basic or advanced command defaults to RLS on, basic.
RLS provides the ability to shut down the Horizon Compact Plus
Ethernet ports (Port 1 on both endpoints) during system outages.
Note: a save mib and reset system command must be issued in order
for the rls setting to take effect.
The default is "off".
Sequence:
set rls [on/off] [basic/advanced]
press Enter
The system responds:
RLS option [on/off][basic/advanced]
Where
On means the RLS function is active.
Off means the RLS function is inactive.
View rls link control
Displays the state of the Rapid Link Shutdown (RLS) link control
feature. RLS provides the ability to shut down the Horizon Compact
Plus Ethernet ports (Port 1 on both endpoints) during system outages.
The RLS link control feature determines how the system will react
when link recovery takes place, either providing automatic recovery of
the Ethernet ports by the Horizon Compact Plus system or waiting for
the user to manually recover the Ethernet ports through use of the "set
rls link enable on" command.
The default is "off".
Sequence:
get rls link control
press Enter
The system responds:
RLS link control option is set to [on/off]
Where
On means the user has to re-establish the Ethernet connection by
using the "set rls link enable on" command
Off means the system will auto-recover the Ethernet connection.
