manualshive.com logo in svg

Dräger Oxylog 3000, Instructions For Use Manual, Page: 66 / 138

Share
Download
Dräger Oxylog 3000 Instructions For Use Manual Download Page 66

Alarms

66

Instructions for Use Oxylog 3000 SW 1.n

In the event of a gas failure

In the event of an internal power failure

CAUTION

In the event of a gas failure, proper ventilation 
cannot be guaranteed. The Oxylog 3000 issues 
the alarm 

!! Supply pressure low

. 

Immediately start ventilating the patient with an 
independent manual ventilation device (resuscita-
tion bag) using PEEP and/or increased inspiratory 
oxygen concentration where appropriate.

WARNING
In the event of an internal power failure, auto-
matic ventilation, volume measurement and 
alarms do not operate!

An audible alarm announces the internal 
power failure.

Spontaneous breathing can continue through 
the emergency air intake.

Immediately start ventilating the patient with 
an independent manual ventilation device 
(resuscitation bag) using PEEP and/or 
increased inspiratory oxygen concentration 
where appropriate.

Summary of Contents for Oxylog 3000











































































































































Reviews:

No comments