Fit the piston pump
●
Swing up table top
1
Handle in starting position.
Do not damage gaskets when fitting pump!
●
Hold piston pump by its handle and insert in machine
– do not use force –
2
Swing handle as far as possible to the left (black).
Fit the breathing system
Hold breathing system by its
3
handle and insert in machine –
4
lock in direction of arrow –
swing as far as possible (black).
Do not damage gaskets when fitting breathing
system!
Replace O
2
sensor for gas sampling system
(if the measuring cell is worn)
5
Unscrew the knurled screw on the back of the machine
(behind the monitor) by turning anticlockwise.
●
Draw used sensor or blank out of the knurled screw
and insert new sensor.
●
Screw knurled screw back into place.
When operating
without
sidestream O
2
sensor:
●
Insert blank instead of O
2
sensor to seal the
measuring system.
Fit valves
6
Fit valve discs in expiration and inspiration valves –
screw on valve caps.
7
Screw on pressure limitation valve APL –
scale facing the front.
Assemble and fit the inspiratory O
2
sensor
(if used)
●
Do not touch wire mesh on cell!
Insert cell with conductors facing wiring –
●
screw sensor housing together –
8
plug sensor onto inspiration valve.
90
Care
Reassembling system
Fit piston pump and breathing system
Replace O
2
sensor for gas sampling system
Fit valves
Assemble and fit the inspiratory O
2
sensor
1
2
6
7
8
3
4
5
16328970
16428970
16528970
16628970
16728970