Camera Receiver
o
Setup – plug the video glasses or other recording device into the handheld
controller video output jacks, located on the bottom of the hand held
controller.
o
Operation - power up your video glasses or other recording device. Live feed
from the camera allows for viewing what the camera is seeing.
o
NOTE: When in video record mode if the Aspect Ratio setting (found on top
of lens ring) is set to 16:9 the display screen will black out. Set it to 4:3 to
allow for viewing. It is also a good idea to set the Auto Focus set to AF setting
found on side of lens ring.
High Definition Video
NOTE :
•
Remote control of shutter and zoom is not available with the HD
Camera.
•
The camera tilt control is reversed, when mounted to the HD Camera .
This can be adjusted using the video setup menu on the configuration
screen of the handheld controller.
Installing the Camera
1. This camera will ship installed on the camera mount
2. Connect the black power and white AV out cables. The white cable will only fit if
the camera screen is opened, with the screen facing outwards. Plug in the white
AV cable, and then fold the screen back.
3. If you have removed the mount from the helicopter, reinstall it as described at the
beginning of the camera section (Quick Release Camera Mount Installation) and
connect the camera mount cables to their matching receptacles on the helicopter.
4. Operation – consult camera user’s manual.
Camera Receiver
o
Setup - plug your video glasses or other recording device into the handheld
controller output jacks.
o
Operation- power up your video glasses or recording device. Live feed from
the camera allows for viewing what the camera is seeing.
Draganflyer X8 – Users Manual
62
07/13/11 Ver 11-01 e
