Draganflyer X8 Touch Screen
To turn on the Draganflyer X8 Handheld Controller press the Red power button as
located in the picture at the beginning of this section.
Power up screen
;
Config
button, used to access programming and operating screens.
Battery TX,
a bar indicator of controller battery status.
Looking for Draganflyer X8 SN
XXXXXXXX
,
indicates it is searching for the
last Draganflyer X8 helicopter it was connected to. If it acquires a helicopter it
will immediately display the Basic screen.
Acquire New
button, used to access a new helicopter.
Note:
The
Views
button on the upper left and the
Config
button on the upper
right are visible on Views or Config screens after the Power up screen.
Draganflyer X8 – Users Manual
32
07/13/11 Ver 11-01 e
