Mach LED 150F / 150 / 150FP
59320002
Edition 12
08.08.2018 / Bak We page 8/26
3.
Operating the light MACH LED 150F / 150 / 150FP
3.1
ON/OFF switch
The push button
1
on the control panel turns
the light
MACH
LED 150F/150/150 FP
ON and
OFF.
3.2
Light intensity control
The lights Mach LED 150F/150/150 FP offer the
facility of light intensity control.
The adjustment range of the light intensity is
from 50 % to 100 %.
The light intensity can be adjusted according to
the requirements of the surgeon / physician.
The light intensity can be decreased by
pressing push button
2
.
The light intensity can be increased by pressing
push button
3
.
The set light intensity is shown by the display
4
.
3.3 Endo – Light (Mach LED
150/150F/150FP with 4500 Kelvin)
In case of endoscopic intervention the light of
the OT- lamp with 4500 Kelvin (optional) can be
dimmed.
The Endo mode is activated by repeated press-
ing of the – key, until only LED
4
is on. When
pressing the – key again, LED
4
goes off and
LED
5
turns on automatically.
The Endo mode is now active.
This mode can be deactivated by pressing the +
key.
1
2
3
4
5
