3.3
EXPANSION CARDS
8- and 16-Channel Analog
Enabled
Check to activate a particular channel. A chan-
nel cannot be edited until it is enabled.
Description
Enter the point description, up to 13 characters.
Label
Enter a 3-character name or abbreviation for
the native units being measured (e.g., F OR C
for degrees).
Unit Thresholds
Enter the numeric boundaries for threshold
alarms (major over, minor over, major under,
minor under).
Dial Alarms
Enter
NONE
for no alarms reported; enter
MJ
for
only Major Over or Major Under to be reported;
enter
MJ+MN
for all cases reported.
Dial Clear
When checked, a dialed alarm will also be
dialed when it clears.
Qual Period and
Enter the time period an alarm must be
Qual Units
active before the KDA will validate it to be
reported.
Scale
Click the “Scale” button to acces the analog
scaling worksheet. This enables monitoring in
native units, rather than volts or milliamps.
(8- and 16-Channel Analog continued)
DCP Address
Must match the base address being polled by the
master. Any range from 1-255 or 0 to disable.
Note
: The
Analog portion
of the 8-analog
4-TBOS card
uses this same
screen.
D-SW-709
UM00C.08103
October 22, 2001
www.dpstele.com
Summary of Contents for KDA 864
