SOFTWARE DETAILS • BASE PORTS AND POLLING MAP
RTS tail
Time, in milliseconds, after serial port data trans-
mission stops that RTS handshaking is cleared.
Ordinarily does not have to be changed, but may
be adjusted if communications timing problems
are encountered or delay is needed for relay key-
ing (see below).
Polling Map
Ports (T8 Displays)
This column defines the physical KDA
ports. Their DCPF output display map-
ping is shown in parenthesis.
Polling TELTRAC
Address/TBOS Display
Enter the TELTRAC addresses and
TBOS displays to be shown on the KDA
Ports. TBOS displays are selected from
the range of 1-8 and must be sequential.
(T/kdaW will automatically adjust if
TBOS displays are entered into an incor-
rect field.) TELTRAC addresses are
selected from the range of 0-126. Any
eight may be selected and entered in any
order. Duplicate addresses are not
allowed.
There are eight
TELTRAC
addresses per
port with one dis-
play per address
(Points 1-63).
Device failures
appear on point
64, 65, and 66 of
each display.
Note:
To preserve TEL-
TRAC mapping
on DPS masters,
always append
new TELTRAC
addresses to the
first available
address slot on
the port.
TELTRAC mapping example:
Port 2, TELTRAC Addresses: 2 9 5 6 7
Map to displays: 9 10 11 12 13
D-SW-709
UM00C.08103
October 22, 2001
www.dpstele.com
Summary of Contents for KDA 864
