DPS KDA 864, User Manual

Page: 16 / 57

SECONDARY DOCKING PORT • SOFTWARE DETAILS
Modem Unit String Number of Rings enter the number of
rings that the KDA should wait before
answering an incoming call.
Callout Delay Sets the minimum time that the KDA will
wait after a previous dialout attempt to
either call in a new alarm or call an alter-
nate number if a previous alarm was not
acknowledged.
Baud Select from OFF , 1200 , 2400 or 9600 ,
normally set to 1200.
Status Report Interval The time period between periodic alarm
status reports dialed from the KDA to
T/Mon. A value of 0 for both hours and
minutes disables periodic status report-
ing.
Dialout Alarm Reporting Determines when the KDA will use the
dialup link to report alarms (as opposed
to normal reporting via fixed connection
on the primary port). This entry works in
conjunction with an entry on the Alarms
definition page for each individual alarm:
• When NORMAL , calls whenever a
DIALALARM occurs, as specified on
the Alarms page.
• When BACKUP , calls only when the
primary port has failed, may be
enabled-or disabled for individual
alarms on the Alarms page.
D-SW-709 UM00C.08103
October 22, 2001 www.dpstele.com