DPS KDA 864, User Manual

Page: 19 / 57

SOFTWARE DETAILS • BASE AND SATELLITE UNITS
1.16
Relays
Description Optional identifying information, shows on monitor dis-
play.
Momentary Time (0.1 seconds to 25.5 seconds) that a relay Activation
Period stays closed when issued a Momentary command.
Base Ports
Port ID Physical port located on the KDA
Protocol Select the Protocol to be used (TBOS or TELTRAC)for
communicating with devices connected to that port.
Select None if the port is not used.
Baud Rate Select the baud rate of the port here. Select from 1200 or
2400 for TBOS. TELTRAC ports must be 1200 baud and
have no selectable options for baud rate.
Parity Select the parity setting from None , Odd or Even. Odd
is the default selection.
Stop Bits Select 1 or 2 Stop Bits.
RTS lead Time, in milliseconds, after serial port RTS handshaking
is asserted that data bits start to be transmitted.
Ordinarily does not have to be changed, but may be
adjusted if communications timing problems are
encountered or delay is needed for relay keying.
D-SW-709 UM00C.08103
October 22, 2001 www.dpstele.com