DPS KDA 864 User Manual Download

Page: 32 / 57

2.3

SPY SECONDARY • TROUBLESHOOTING

Spy Options

Pause

Causes display to temporarily stop. (Button will tog-

gle to

Resume

once selected.)

Clear

Refreshes screen by erasing all data bytes and start-

ing with clean window.

Capture

Captures protocol analyzer display to a file in the

TCONFIG directory. File name appears at lower

right corner of analyzer window. In File name

includes a sequence number. The 000 increments

001, 002, etc. each time a capture is executed.

Deleting the files from the directory will return the

counter to 000.

Hex, Ascii, Dec

View data bytes in any one of three forms.

Scroll

Check this box to use automatic scrolling.

Primary, Satellite,

Select desired unit or items to view.

Spy Secondary

Access the Spy Secondary screen

under the Tools item under the main

T/KdaW menu. This screen will allow

the user to view and capture the activ-

ity on the docking module installed in

the KDA secondary docking pad, usu-

ally a modem.

Lan Traffic or
LanCommands

D-SW-709

UM00C.08103

October 22, 2001

www.dpstele.com

Summary of Contents for KDA 864


























































Search results

Summary of Contents for KDA 864

Reviews:

Related manuals for KDA 864

Brands by name

Popular brands

DPS KDA 864, User Manual

Search results

Summary of Contents for KDA 864

Reviews:

Related manuals for KDA 864

Brands by name

Popular brands