When cutting label longer than 250mm, is recommend to decrease the cutting speed. The
cutting speed reduction depends on the job in process.
The cutting speed can be set within the range of 50 to 600.
WHEN AND HOW TO REDUCE THE PLOTTER FEEDING SPEED
17.
Wait until on the display appears
“READY”.
21
18.
Open the Cutting manager and click
on “Advanced” and then select “Init cutter”.
Click “YES” to confirm
19.
Wait until “Init cutter completed” will be
shown in the status bar.
Plotter display will show “LABEL MEDIA”
as status.
