4. Cut the labels when the first “good” labels are visible;
5. Make sure the tension on all rolls is even and attach each label to the core using a
waste label;
6. Feed edges trim waste into the waste basket under the hole.
Press RESUME to start your finishing process.
Remove the iron bar by unscrewing
the black thumb screw.
1
Slide in or out the blade holder.
Relocate the slide iron bar in its
position and rescrew the thumb screw.
2
Metal guides can be adjusted in order to prevent the web from rolling.
HOW TO ADD OR REMOVE A BLADE HOLDER
METAL GUIDE ALIGNMENT
15
