After you CUT TEST is successful,
press “START” to cut a few labels until
you think you have enough media to
load onto the matrix remover.
Pull the media through the aluminium
rollers first (the guide can be adjusted
in order to prevent the web from rolling)
then through the clutch system.
Close the loading system and the
media will be automatically loaded into
the clutch path.
The user can adjust the clutch force thanks to the position of the clutch system.
Maximum Cluth (rewinded roll more tight)
Minimum Cluth (rewinded roll less tight)
HOW LOAD THE MATRIX REMOVER & SLITTER
Pull the sides of the black knobs and lift up the clutch system, other black knobs will keep
it open.
Minimum clutch
Maximum clutch
12
