RS4203 Manual
Chapter 14 – Maintenance Guide
Rev 32, 01/11/13
Copyright © 2013, Tipper Tie, Inc., All rights reserved
104
___ Movable voiders retract towards and flush with fixed voiders.
___ Both pairs of voiders close.
___ Movable voiders extend or separate away from fixed voiders.
___ Clipper swings down in between both pairs of voiders.
___ Clipper gate closes.
___ Clipper punch extends down and knife is fired.
___ Clipper gate opens, clipper swings back, and both voiders open.
___ Movable voiders retract towards fixed voiders.
___ Test Mode cycle has been completed.
___ Check that all air gauges are functional (clipper regulator and main incoming air).
14.12.6 Notify Production
Notify production that the maintenance and setup procedure is complete, and that the machine is ready
for operation.
14.12.7 Observe Proper Lubrication
Before signing off the machine, during the initial heat sealing operation of the machine, observe the
lubrication drop rate and adjust if necessary.
