background image

 

02.2010

Safety Instructions

Food Safety Instructions (HACCP) 

As operator of the dispenser you are responsible for safe and hygienic 

operation. Follow the instructions in this section to comply with food safety 

standards.

Storage of ingredient packs 

•  Refer to the ingredient packs for storage instructions. (Fig. 1)

•  Use ingredient packs according to the „first-in-first-out“ principle.

•  Do not use packs for which the „Best before“ date has expired. (Fig. 2) 
•  Shake thawed packs at least 10 times before placement in the 

dispenser. (Fig. 3)

Handling of ingredient packs 

1. Wash your hands before you touch ingredient packs. (Fig. 4)
2. Read the instructions on the rear of the ingredient pack.
3. Check ingredient packs for damage.  

Do not use damaged ingredient packs. 

4. Read the date on the „Best before“ label on the pack.  

If the „Best before“ date has passed, do not use the pack. 

5. Consult the ingredient pack for instructions. 

Write the „Expiry Date“ on the pack. (Fig. 5)

 

  Note:

When you handle open ingredient packs, avoid spills of ingredient on 

clothes, floor, or equipment.

 

  Caution:

Do not touch the tips of the dosing tubes with your hands or cloth you 

use for cleaning.  

If the dosing tubes need cleaning, rinse them with clean water only.

If you plan not to use the dispenser for a short period of time (e.g. over the 

weekend), use the ON/STANDBY/RESET-switch to set the dispenser in 

STANDBY mode.

•  This will switch off the boiler and drink delivery to save energy
•  This will keep the cooling of the ingredient storage unit operational to 

preserve the quality of the ingredient packs.

If  you plan not to use the dispenser for a long period of time (e.g. during 

works holidays) follow the instructions  as described in ‚Switch the dispenser 

off or on‘. 

Liq

uid

 Co

ffe

e E

xtr

ac

t

Ha

nd

lin

g i

ns

tru

cti

on

s

Sto

re 

ina

 dr

y a

nd

 co

ol 

pla

ce

 be

low

 25

 C

pre

fer

ab

ly 

in 

a r

efr

ige

rat

or 

for

 be

st 

qu

ali

ty.

Ro

tat

e s

toc

k, 

firs

t in

 fir

st 

ou

t. T

o o

pe

n t

he

 

pa

ck

, fo

llo

de

tai

led

 in

str

uc

tio

ns

 as

 

ind

ica

ted

 on

 th

e b

ac

k o

f th

is 

pa

ck

.

Sh

elf

 lif

e

Pr

od

uc

tio

n d

ate

 : S

ee

 ot

he

r s

ide

Be

st 

be

for

e d

ate

 w

he

n k

ep

t d

ry 

an

co

ol 

be

low

 25

 C

: S

ee

 op

po

sit

e s

ide

.

Ing

red

ien

ts 

: C

off

ee

 ex

tra

ct 

(dr

y c

off

ee

 ex

tra

ct:

 27

.5%

)

Liq

uid

 Co

ffe

e E

xtr

ac

t

Ha

nd

lin

g i

ns

tru

cti

on

s

Sto

re 

ina

 dr

y a

nd

 co

ol 

pla

ce

 be

low

 25

 C

pre

fer

ab

ly 

in 

a r

efr

ige

rat

or 

for

 be

st 

qu

ali

ty.

Ro

tat

e s

toc

k, 

firs

t in

 fir

st 

ou

t. T

o o

pe

n t

he

 

pa

ck

, fo

llo

de

tai

led

 in

str

uc

tio

ns

 as

 

ind

ica

ted

 on

 th

e b

ac

k o

f th

is 

pa

ck

.

Sh

elf

 lif

e

Pr

od

uc

tio

n d

ate

 : S

ee

 ot

he

r s

ide

Be

st 

be

for

e d

ate

 w

he

n k

ep

t d

ry 

an

co

ol 

be

low

 25

 C

: S

ee

 op

po

sit

e s

ide

.

Ing

red

ien

ts 

: C

off

ee

 ex

tra

ct 

(dr

y c

off

ee

 ex

tra

ct:

 27

.5%

)

1

2

3

4

5

Summary of Contents for Cafitesse 600

































Reviews: