Douwe Egberts Cafitesse 600, Operator'S Manual

Page: 13 / 32

02.2010 13
Operation
(re)place ingredient packs
Detect an empty ingredient pack
When an ingredient pack is empty, the

symbol will appear on the display.
(Fig. 22)
• When you touch the i symbol on the display, the dispenser will indicate:
xxxx is empty, please call the operator.
(where xxxx indicates the empty ingredient pack).
• When a user selects a drink and a required ingredient pack is empty, the
dispenser will display the message: Sorry this selection is not available.
Please make another selection and call the operator. xxxx is empty
(where xxxx indicates the empty ingredient pack).
Note:
You can customise part of this message using the operator menu
(see „Program the dispenser“).
Replace an empty ingredient pack
Caution:
Please follow the „Food Safety Instructions (HACCP)“ when you
handle the ingredient packs.
1. Wash your hands before you tough the ingredient packs. (Fig. 23)
2. Take an ingredient pack.
Caution:
Read the instructions on the back side of the ingredient pack.
Do not use damaged ingredient packs.
Do not use ingredient packs, if the „Best before“ date has passed.
(Fig. 24)
3. Shake the pack at least 10 times (Fg. 25)
4. Remove the plastic wrapper and write the „Expiry date“ on the pack.
(Fig. 26)
5. Follow the instructions on the pack to unfold the dosing tube.
Check that the dosing tube is positioned straight and that the colored
ring on the tube covers the corresponding circle on the pack. (Fig. 26)
6. Open the dispenser and ingredient storage door.
7. Place the pack in the dispenser. (Fig. 27)
8. Close the ingredient storage and dispenser door.
9. Dispense a drink and check color, aroma and taste.
Note:
If your dispenser uses two identical ingredient packs (for example
coffee-coffee) your Cafitesse system supplier can enable an
automatic pack switch-over mode. In this mode, the dispenser will
automatically start dispensing from the second ingredient pack after it
detects the first pack is empty.
If this applies to your situation, always switch the dispenser off with
the ON/STANDBY/RESET button and again on after replacing a
ingredient pack to reset the switch-over sensor.
22
23
24
25
26
27