Douwe Egberts Cafitesse 600, Operator'S Manual

Page: 15 / 32

02.2010 15
Operation
The dispenser supports two cleaning procedures, „Flushing“ and „Cleaning & Flushing“. The display will
indicate which procedure is required, and will provide step-by-step instructions to guide you through the
procedure.
• Flushing is an automatic program of the dispenser that takes approximately one minute. Flushing
is required at least once a week. During flushing the dispenser will flush all parts that come into
contact with liquid ingredients with hot water.
Caution:
Dispenser models that also deliver cold drinks (café cool) require flushing 6 times a week.
For hygienic reasons these dispenser models will also dose small amounts of liquid ingredient
during the cold water flushing procedure. Therefore there will always be hints of ingredient
concentrate in the flush water.
• Cleaning and flushing is an intensive cleaning procedure that takes approximately 3-15 minutes.
Cleaning and flushing is required at least once a week.
During the program „Cleaning & Flushing“ you must:
• Remove the ingredient packs from the ingredient storage
• Clean the ingredient storage and re-insert the ingredient packs into the ingredient storage
• Remove all parts that come in contact with liquid ingredients from the dispenser.
• Clean these parts outside the dispenser with a special cleaning agent.
• Re-insert the parts into the dispenser
• Start the automatic flushing program.
Note:
To reduce cleaning time at the dispenser to 3 minutes, we recommend the use of trough
exchange kits, existing of a clean trough and lid.
Without exchange kit the cleaning time is determined by the time for soaking the trough and lid
in cleaning agent.
Warning:
The liquids delivered by the dispenser are hot! Avoid scalding!
Keep hands and other body parts away from the dispenser during the automatic flush
program.
Start the cleaning procedure
1. Touch and hold the top centre of the touch screen display for 3 seconds. (Fig. 31)
2. Touch the display to select the cleaning procedure:
• ‚FLUSHING‘ or
• ‚CLEANING & FLUSHING‘
Note:
If a cleaning procedure is due or overdue, the dispenser will automatically start the required
procedure.
3. Proceed as described in the corresponding section below.
Note:
To cancel the cleaning program, touch the small arrow in the upper left corner. (Fig. 32)
CLEANING
CLEANING
FLUSHING &
FLUSHING
31 32