Douwe Egberts Cafitesse 600, Operator'S Manual

Page: 16 / 32

16 02.2010
Operation
Flushing
When you start the program „Flushing“ you can select:
• FLUSH WATER SIDE to flush the hot water outlet,
or
• FLUSH PRODUCT SIDE to flush the drink outlets.
Note:
You may skip the hot water flush. This will not block the delivery of
drinks by the dispenser. We recommend however to flush the hot
water outlet after long periods of inactivity, for example after the
weekend.
To flush the water outlet
1. Place an empty container of 3 litre (3/4 gal) underneath the hot water
outlet. (Fig. 33)
2. Touch the field ‚FLUSH WATER SIDE‘.
The dispenser will flush the outlet for approximately 5 seconds.
Warning:
The liquids delivered by the dispenser are hot! Avoid scalding!
Keep hands and other body parts away from the dispenser
during the automatic flush program.
To flush the product outlets
1. Place an empty container of 3 litre (3/4 gal) underneath both product
outlets. (Fig. 34)
2. Touch the field ‚FLUSH PRODUCT SIDE‘.
The dispenser will flush the outlet for approximately 45 seconds.
Warning:
The liquids delivered by the dispenser are hot! Avoid scalding!
Keep hands and other body parts away from the dispenser
during the automatic flush program.
After the flushing procedure, the dispenser will automatically return to normal
delivery mode.
3. Select a drink button to test delivery for each hot drink
4. Check color, aroma and taste of each drink.
• If the drink quality is not ok, perform the
„Cleaning & „Flushing procedure.
If the problem persists, consult your Cafitesse system supplier.
• If the drink quality is ok, this will complete the flushing procedure.
33
34