![Dot Hill Systems SANnet II 200 Installation, Operation And Service Manual Download Page 172](http://html1.mh-extra.com/html/dot-hill-systems/sannet-ii-200/sannet-ii-200_installation-operation-and-service-manual_2524262172.webp)
I-4
SANnet II 200 SCSI Array Installation, Operation, and Service Manual • June 2005
Note –
To return to the Kermit prompt type
Ctrl \
and then
C
. To exit Kermit, first
return to the Kermit prompt, and then type
exit
.
I.3
Attaching the Disk Array
The simplest way to configure a disk array is to use System Administration Manager
(SAM), HP-UX’s system administration tool. If SAM is not installed on your system,
or if you prefer to use the command-line interface, the following procedures can guide
you through the task. For more information, consult the HP document
Configuring HP-
UX for Peripherals
:
1. Use the
ioscan
command to determine what addresses are available on the host bus
adapter (HBA) you plan to attach to the array.
2. Access the firmware application on the SANnet II 200 SCSI array and set the SCSI
IDs of the host channels you want to use.
3. Map the partitions containing storage that you want to use to the appropriate host
channels.
Partitions must be assigned to LUNs in sequential order beginning at LUN 0.
4. Halt the OS using the
shutdown
command.
5. Turn off all power to peripheral devices and then to the server.
6. Attach one or more host channels of the SANnet II 200 SCSI array to the SCSI
interface cards in the host using the supplied SCSI cables.
7. Turn on the power to the SANnet II 200 SCSI array and all other peripheral devices.
8. After they are initialized, power on the server and boot HP-UX.
During the boot process, the OS recognizes the new disk devices and builds device
files for them.
9. Verify that you can see the new storage resources by running the
ioscan
command.
You are now ready to use the storage.
(/) C-Kermit>
C
Connecting to /dev/tty0p1, speed 38400.
The escape character is Ctrl-\ (ASCII 28, FS)
Type the escape character followed by C to get back,
or followed by ? to see other options.
Summary of Contents for SANnet II 200
