Dot Hill Systems SANnet II 200, Installation, Operation And Service Manual

Page: 140 / 186

E-4 SANnet II 200 SCSI Array Installation, Operation, and Service Manual • June 2005
E.3 Enabling a Solaris Host to Recognize New
Devices and LUNs
By default, a Solaris host is configured for one host LUN per SCSI target, which is not
enough LUNs for a SANnet II 200 SCSI array. You must edit the appropriate onboard
HBA driver configuration file to add more targets and LUNs, up to 32 LUNs per
logical drive, and a maximum of 128 LUNs per SANnet II 200 SCSI array.
Driver configuration files include
/kernel/drv/qus.conf
and
/kernel/drv/glm.conf
. Edit the file which is appropriate for your HBA.
Note –
Refer to the
driver.conf
(4) man page for information and syntax to use.
Refer to your HBA release notes and your HBA installation guide for specific
configuration information.
Once you have edited the configuration file, reboot the host for the changes to take
effect.
name="sd" class="scsi"
target=3 lun=1;
name="sd" class="scsi"
target=3 lun=2;
name="sd" class="scsi"
target=3 lun=3;
name="sd" class="scsi"
target=3 lun=4;
name="sd" class="scsi"
target=3 lun=5;
name="sd" class="scsi"
target=3 lun=6;
name="sd" class="scsi"
target=3 lun=7;
name="sd" class="scsi"
target=3 lun=8;
# END additional lun entries