Dot Hill Systems SANnet II 200, Installation, Operation And Service Manual

Page: 169 / 186

I-1
APPE NDIX
I
Configuring an HP Server Running the
HP-UX Operating System
This appendix provides access information and LUN setup information needed when
you connect a SANnet II 200 SCSI array to a computer running the HP-UX OS.
For a list of supported host bus adapters, refer to the SANnet II 200 SCSI Array
Release Notes .
The SANnet II 200 SCSI array supports the HP-UX OS Level 11.0 and Level 11.i in
dual-path configurations using multipath failover drivers for the HP-UX OS.
Refer to the SANpath User’s Guide for detailed instructions about setting up the device
driver on the server and for additional information about configuring your HP server.
The information in this appendix supplements the configuration steps presented in
Chapter 4 and covers the following topics:
■
“Setting Up a Serial Port Connection” on page I-2
■
“Accessing the Firmware Application From an HP Server Running HP-UX” on
page I-2
■
“Attaching the Disk Array” on page I-4
■
“Logical Volume Manager” on page I-5
■
“Definitions of Common Terms” on page I-5
■
“Creating a Physical Volume” on page I-5
■
“Creating a Volume Group” on page I-6
■
“Creating a Logical Volume” on page I-8
■
“Creating an HP-UX File System” on page I-8
■
“Mounting the File System Manually” on page I-8
■
“Mounting the File System Automatically” on page I-9