Dot Hill Systems SANnet II 200, Installation, Operation And Service Manual

Page: 144 / 186

E-8 SANnet II 200 SCSI Array Installation, Operation, and Service Manual • June 2005
3. (Optional) If you see this confirmation prompt, type
y
and press Return to display the
FORMAT MENU.
The
FORMAT MENU
is displayed.
4. Type
type
to select a drive type:
5. Type
0
to choose the
Auto configure
option.
Select the
Auto configure
option regardless of which drive types are displayed by
the
type
option.
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return0
quit
format> type