1
Product overview
1.1
Overview
Fig. 1: Product overview
1
Material connection
2
Atomizer air connection
3
Control air connection
4
Material flow control
5
Screw cap
6
Nozzle
7
Fastening bore
8
Housing
1.2
Short description
The atomizer is using compressed air to coat
surfaces. The coating material is fed through
lines.
The following factors influence the spray jet
and the result:
Atomizer air pressure
The higher the atomizer pressure, the
higher the atomizing and the finer the
spray jet
Control air pressure
Opens the needle and controls the mate-
rial flow.
Material pressure
The higher the material pressure, the
higher the material flow
Control air pressures and the atomizer pres-
sure are controlled externally via valves.
The material flow can also be regulated via
the regulator on the atomizer, if it is not con-
trolled externally.
2
Safety
2.1
Explanation of symbols
The following notes can appear in this
instructions manual.
DANGER!
High risk situation that can lead to serious
injuries or death.
WARNING!
Medium risk situation that can lead to
serious injuries or death.
Product overview
11/2016
EcoGun AS AUTO Mini RS - MSG00007EN
4/28
