NOTICE!
Property damage due to improper
replacement of needle and nozzle
Replacing only the needle or only the
nozzle could damage spray gun compo-
nents. This can compromise the tightness
of the spray gun. The spray pattern dete-
riorates.
– Observe order of replacement steps
(needle – nozzle).
– Observe order of assembly steps
(nozzle – needle).
– Always replace nozzle and needle at
the same time.
NOTICE!
Property damage due to improper han-
dling
Mechanical load can damage needle and
nozzle.
– Handle with care during installation
and dismantling.
– Do not subject the needle to any
mechanical pressure.
– Avoid collisions of components to be
assembled and disassembled with
the needle.
– Do not excessively tighten compo-
nents.
Disassemble
1. Thread off control knob (1).
2. Thread off bolt (2).
3. Remove needle spring (3) and plunger
spring (4).
4. Pull out distance bolt (5) and needle (8)
and locknut (6).
5. Loosen cap nut (10).
6. Remove nozzle (9).
7. Loosen lock nut (6).
8. Unscrew distance bolt (5) from needle
(8).
9. Replace worn out or defective compo-
nents.
Assembling
10. Insert nozzle (9).
Depending on the use case,
use a nozzle with a suitable
diameter.
11. Use a drop of oil to wet the threads for
cap nut on the atomizer.
12.
NOTICE!
Risk of damage to the nozzle
Hand-tighten cap nut (10). Do not over-
tighten the screw cap.
13. Thread-in the distance bolt (5) on the
needle (8).
15.
NOTICE!
Risk of damage to the needle
Lightly pull back the slip ring (7) against
the spring force. Carefully push in dis-
tance bolt (5) with needle (8) and
locknut (6) into the housing.
16. Insert needle spring (3) and plunger
spring (4).
17. Thread in bolt (2).
18. Thread in the control knob (1).
Faults
11/2016
EcoGun AS AUTO Mini RS - MSG00007EN
15/28
