10.
NOTICE!
Risk of damage to the needle
Lightly pull back the slip ring against the
spring force. Push in distance bolts with
needle and locknut carefully into the
housing.
11. Insert needle spring (3) and plunger
spring (4).
12. Thread in bolt (2).
13. Thread in the control knob (1).
8.2.3 Set delay time
Fig. 8: Set delay time
Protective equipment:
Protective workwear
Protective gloves
NOTICE!
Improper setting causes damage
The delay time is factory-set. Setting a
wrong delay time can damage the nozzle
and the needle.
– You should only change the delay
time upon inserting a new needle or
in case there are problems with the
spray pattern.
– If in doubt, contact Dürr Systems
Faults
11/2016
EcoGun AS AUTO Mini RS - MSG00007EN
17/28
