DÖRR EcoGun AS AUTO Mini RS, Operation Manual

Page: 12 / 28

Clean the nozzle
Fig. 5: Cleaning the atomizer
For a thorough cleaning you can remove the
nozzle.
1. Loosen the cap nut (2).
2. Remove nozzle (1).
3. Clean the nozzle in the cleaning bath.
4. Insert nozzle (1).
5. Use a drop of oil to wet the threads for
cap nut on the atomizer.
6.
NOTICE!
Risk of damage to the nozzle
Hand tighten the cap nut (2). Do not over-
tighten the screw cap.
7.3 Maintenance
7.3.1 Maintenance schedule
The maintenance intervals given below are based on experiential values. Adjust maintenance
intervals individually if necessary.
Interval Maintenance work
Daily Check condition and tightness of the connections and
lines.
Check fastening
Before every change of material
Clean Ä 7.2 “Cleaning”.
monthly
Remove and lubricate piston Ä 8.2.2 “Replace needle
seal”
after each alteration
Check grounding Ä 4.2 “Assembly”
Cleaning and maintenance
11/2016 EcoGun AS AUTO Mini RS - MSG00007EN 12/28