10
Exit Device Operators 630/750/79E/RT/E7900 Series/ Generation E-730 PK3677_T
10-18
FDU
Program the lock using the FDU and the
E-760/770/790 communication cable (see Reference
Manual). If this is not a new installation but a
replacement of a single lock or a group of locks in
a property already equipped with the dormakaba
locking system, transfer the security information
from a neighbouring lock to the new lock by using
the Reset Addresses function (see Reference Manual
resetting lock addresses).
ATLAS
Program the lock using the M-Unit (Maintenance
Unit). Refer to ATLAS User Guide.
I
n the case of a replacement lock resetting the
addresses will ensure that all past lost and stolen
keycards remain cancelled in the new lock and will
set the addresses for the Section, Floor, Group,
Zone and Area sub-master level so that staff key-
cards in use at the property will have the same
pattern of access to the door as before. This step
makes the lock replacement transparent so that the
new lock accepts and rejects the same keycards as
the old lock.
Multihousing
Program the lock using the M-unit or EAMU FDU.
Refer to RezShield User Guide or FDU user Guide.
Aurora
Program the lock using the M-unit (Maintenance
Unit) or with command cards and Aurora software
using the Aurora software guide.
Enterprise
Program the lock using the PC M-unit (Maintenance
Unit) or with command cards and Enterprise soft-
ware using the Enterprise software guide.
F Program the E-730/750/79E/E7900 lock
(For 630 lock go to Section H) (For RT lock series, please refer to system 6000
manual) (E7900 see command card)
