BUSY SWING (SAFETY)
NO
NO
Note: To one operator or the other, but not to both.
EXTERIOR SWITCH
GROUND
+12VDC
23
5
8
NC
7
6
EXTERIOR ED 800
4
C
VESTIBULE
1
OPEN TRIGGER
BUSY SWING (SAFETY)
GROUND
+12VDC
OPEN TRIGGER
12
INTERIOR SWITCH
3
OPTIONAL SWITCH
INSIDE VESTIBULE
57
8
NC
6
INTERIOR ED800
C
VESTIBULE
4
INSIDE VESTIBULE
NO
NO
EXTERIOR SWITCH
1
GROUND
+12VDC
23
OPEN TRIGGER
VESTIBULE
C
BUSY SWING (SAFETY)
47
8
6
EXTERIOR ED 800
NC
5
1
GROUND
23
OPEN TRIGGER
+12VDC
INTERIOR SWITCH
VESTIBULE
C
8
7
6
INTERIOR ED800
NC
5
4
BUSY SWING (SAFETY)
OPTIONAL SWITCH
BY ED800
NOT USED
DATA (+)
DATA (-)
NO
GROUND
13
OPEN TRIGGER
4
+12VDC
2
BUSY SWING (SAFETY)
5
VESTIBULE
C
6
8
NC
7
ED800
PS-1
12-24 VAC/VDC + 10°
COM
NO
NC
VESTIBULE FUNCTION
The ED 800 can provide two different types of vestibule functions depending on the method of
wiring.
SIMULTANEOUS OPERATION
In this operation, both doors will open at the same time. The switch for each door and the
optional switch inside the vestibule will cause both doors to open at the same time.
ED800-23
08102710 05/07
SEQUENTIAL OPERATION (SINGLE DOORS)
In this operation, the doors will open in sequence. The switch at each door will activate that door.
After that door closes completely, the other door will be activated. For example, when the
exterior switch is depressed the exterior door will open. When the exterior door closes
completely, the interior door will then open. This operation is the same in both directions. The
optional switch inside the vestibule opens both doors simultaneously.
BUSY SWING (SAFETY)
The ED800 has a built-in safety circuit which can be interfaced with an optional presence sensor.
When activated, the safety circuit prevents the door from receiving an "open trigger" signal.
Additionally, when the door is in the open position, the safety circuit will now act as an "open
trigger" signal, keeping the door open until the signal is no longer present. The use of the safety
circuit is optional and not required. However, by utilizing the safety circuit, the ultimate Safety and
convenience can be realized. The Safety circuit is activated by making a contact between " Busy
Swing (Safety)" and "Ground".
PS-1 Presence Sensor
Summary of Contents for ED800 J
Page 26: ......
