ED800-16
08102710 05/07
POWER ADJUSTMENTS
NOTE: Before making any power adjustments, the ED 800 unit must be properly installed on
the door and frame, the arm must be adjusted and the spring tension set.
Refer to the Functional Detail in the General Information section for a complete description of the
operation of the ED 800 in Low Energy Function.
LOW ENERGY FUNCTION
1. Adjust the "Power Assist/Low Energy" slide switch to the "Low
Energy" position.
2. Adjust the "Door Width" potentiometer to match the approximate
door width. Doors must be between 36 and 48 inches wide for
optimum operation.
3. Adjust the "Opening Time(LE)" potentiometer to obtain the
desired door opening time. "MIN" is the least amount of opening
time (fastest door speed), and "MAX" is the greatest amount of
opening time (slowest door speed).
4. Adjust the "Opening Angle" potentiometer to obtain the desired
angle of opening (Hold Open Position). This is adjustable from 85°
to 115°. This is a "live" adjustment when the door is in the hold
open position
5. Adjust the "Delay Time" potentiometer to obtain the desired
amount of time the door will remain at the hold open position. This
is adjustable from 5 to 60 seconds. The delay time will commence
when the door reaches the hold open position, or when it last
receives an actuation input, whichever occurs later.
6. Adjust the "Push & Go" slide switch as required. When in the
"on" position, a door movement of one inch will activate the unit. If
the user opens the door briskly beyond 45° the Push & Go feature
will abort. This is to conserve heating and air conditioning energy
and to prevent the unit from operating needlessly. When in the "off"
position, the unit must be activated externally.
PUSH/PULL SWITCH
Determine that the Push/Pull switch is set properly.
Push is required for all top jamb applications. Pull is
required for all track applications. (See page 18 for
switch location)
LATCH DELAY ON/OFF SWITCH
When turned "ON" this switch delays the function of
the operator by 1/2 second to allow time for a strike to
operate. (See pages 5 or 25)
LATCH DELAY SWITCH (OFF/ON)
MOUNT STYLE SWITCH (PUSH/PULL)
CLOSING OBSTACLE SWITCH (OFF/ON)
Summary of Contents for ED800 J
Page 26: ......
