Doran 4100L Instruction Manual Download Page 95 | Manualshive

Page: 95 / 95

Doran 4100L Instruction Manual Download Page 95

Warranty Statement

LIMITED WARRANTY

STATEMENT

DORAN SCALES, INC. warrants its products to be free from defects in
material and workmanship  for a period of two (2) years from date of
shipment. Any product found to be defective within this  time period may
be returned to  DORAN’s factory, freight prepaid, with prior return
authorization for repair or replacement at no charge.

DORAN’s liability under this warranty is limited to the repair or
replacement of the defective product and in no event shall DORAN be
liable for consequential or indirect damages to equipment or personnel.
Nor shall DORAN be liable for damages to equipment or for personal
injury caused by misuse, overload, accidental damage, alteration,
improper installation, or unauthorized opening of the equipment. Under
no circumstances will DORAN be responsible for any indirect or
consequential damages due to errors in weighing or failure of a DORAN
product to perform properly.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED. THIS WARRANTY CONSTITUTES DORAN’S
EXCLUSIVE WARRANTY. THERE ARE NO OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

DORAN SCALES, INC.

1315 PARAMOUNT PARKWAY

BATAVIA, ILLINOIS 60510

(630) 879-1200

Model 4200

«
...
93
94
95

Summary of Contents for 4100L
































































































Reviews:

No comments