manualshive.com logo in svg

Doran 4100L, Instruction Manual, Page: 45 / 95

Share
Download
Doran 4100L Instruction Manual Download Page 45

12. Tare Entry Mode (tAr)

Option

Description

SEt

Tare entered via UP and DOWN arrow buttons.

P.t.t.

Tare entered by single press of TARE button.

diS

Tare entry disabled.

The Tare Entry Mode parameter allows the user to select how the tare parameter in the
4200 operates.  It can be either a standard "Push to Tare" button, causing the weight
display to come to zero when pressed, or it can be used in conjunction with the UP and
DOWN arrow buttons to preset a tare value from the front panel.  In addition, the tare button
can be disabled if it is not to be used, or if it is desired to preset a tare to secure it from
tampering by the scale operator.  See Section 4 for more information.

13. Baud Rate Selection, Port 2 - Printer (b.r.t.)

Option

Description

30

300   baud

120

1200  baud

240

2400  baud

480

4800  baud

960

9600  baud

19.2

19200 baud

The Baud Rate parameter is used to select the data output rate for the transmitting of serial
data through the simplex (printer) port.

13a. Baud Rate Selection, Port 1 - Duplex (d.b.r.)

Option

Description

30

300   baud

120

1200  baud

240

2400  baud

480

4800  baud

960

9600  baud

19.2

19200 baud

To select the baud rate for the duplex port, press the PRINT button to enter the Duplex Port
Selection when the parameter menu is in Baud Rate Selection Simplex Port (b.r.t). If the
pass-through mode is used, both ports must have the same baud rates.

Section 6  Parameter Setup

37

Summary of Contents for 4100L
































































































Reviews:

No comments