DOPOD 577W, User Manual

Page: 49 / 168

49
2
Using Phone
Features
1. Select the “Record” button, and after “Beep” sound,
start reading the number pointed by a red pointer.
2. After finished recording, system will play the recorded
voice, and wait for confirmation.
3. If the playback voice is correct and clear, select the
“Yes” button, system will check the string and then
proceed to the next digit string for recording.
4. If user selects “No”, then system will stay at the current
string without checking it off.
5. During voice recording, user can select the “Cancel”
button to abort this recording.
6. If user does not satisfy with the previously adapted
model, and wants to redo the training, select the “Done”
button and System will ask you if use this adapted
digit model, please select “No” then re-back the [Digit
Training] again. System will show there is existed one
adapted model, please select “Yes” to replace the old
model then restart the record process again.
7. When the training is finished, system will prompt a
message.
[Digit Setting] Setting Page
This page is provided for user to set a constraint for the
length of the phone number in digit dial.
The system provides three valid lengths for phone number
verification purpose. The default settings are 3, 7 and 10.
Users can change any one of the three values according to
the local telecom rules.
The maximum length of digits is 18, and if user wants to
disable the constraints, just select the “No constraint” item in
the check box.