27
NHM/NHP Series NHM/NHPATCE29
No.
Alar
m
Massage
Recovery
23
2292
MUST BE ATC MAN. 1 CYCLE
1) The ATC cam is not in the home position.
2) The switches that check where the spindle tool
clamping/unclamping operation by APC takes place
are triggered simultaneously.
3) The position of the switch is set improperly.
4) Adjust the position of the switch and check if it works
properly.
24
2293
MUST BE ATC MAN. 1 CYCLE
1) ATC is operated manually.
2) Perform 1 cycle in manual operation mode.
25
2294
WAIT. POT AND SPDL TOOL ZERO
1) The tool data is 0 for both waiting pot or main spindle.
2) Provide tool data.
3) Instruct a T code.
26
2295
TOOL CHG. MOTOR BRAKE RELE.
1) The motor brake of the ATC tool changer is released.
2) The braking operation is completed. Turn off the manual
PMG brake switch.
Summary of Contents for NHM Series
Page 1: ...Machine Tools Adjusting Maintaining ATC NHM NHP Series ...
Page 2: ......